What Is Your Business Actually Worth?
Ask three advisers what your business is worth and you will get three different numbers — and all three may be right. A valuation is a range, not a price: it depends on the method, the size and sector, the quality of earnings, and what the buyer is really buying — profits, assets or growth. This guide explains the main methods UK buyers use, the 2026 multiples by business size and sector, and a full worked example from reported profit to the cash you would actually receive after tax.
The first distinction matters more than any multiple. Enterprise value is the value of the whole business before debt and cash. Equity value — what you, the owner, actually receive — is the enterprise value less net debt (borrowings minus cash), adjusted for working capital.
The Main Valuation Methods Compared
Most UK small businesses are valued by one primary method and one cross-check. Which method is yours depends on what a buyer is really buying. Discounted cash flow — forecasting future cash and discounting it back to today — is a useful cross-check, but too sensitive to assumptions to be a primary method for most small businesses.
| Method | How it works | Best for | Main weakness |
|---|---|---|---|
| Earnings multiple (EBITDA) | Normalised EBITDA × market multiple | Profitable businesses, £200,000+ stable EBITDA | Only as good as the normalised profit and comparables |
| Seller’s Discretionary Earnings (SDE) | Owner earnings × a lower multiple, often 1× to 3× | Micro businesses where the buyer will also run it | Very sensitive to how much the business depends on the owner |
| Asset-based | Net assets at market value | Asset-heavy, loss-making or winding-down businesses | Ignores earning power, so it undervalues a profitable business |
| Revenue multiple | Turnover × a multiple | Fast-growing businesses with recurring revenue, little profit yet | Revenue says nothing about margins or when profit arrives |
| Discounted cash flow (DCF) | Forecast cash flows discounted back to today | Cross-checking an earnings valuation | Very sensitive to growth and discount-rate assumptions |
Method 1: The Earnings Multiple (Normalised EBITDA)
For most established UK small businesses, the starting point is normalised EBITDA — earnings before interest, tax, depreciation and amortisation, adjusted to show the repeatable profit a buyer could expect. The formula is simple: enterprise value equals normalised EBITDA multiplied by the relevant multiple. A business generating £500,000 of normalised EBITDA at a 5× multiple has an enterprise value of £2,500,000.
The hard work is in the word “normalised”. Reported profit is not maintainable profit, so you adjust it. Add back one-off costs that will not recur, such as a legal dispute or a flood repair. Add back the owner’s salary above the market rate for the job — if you pay yourself £90,000 for work a hired manager would do for £55,000, £35,000 is added back. Add back personal costs run through the business, such as a family car, and subtract costs a new owner would have to pay that you do not, such as rent on a property you own and use for free. Buyers will challenge every add-back, so keep evidence for each one. Our guide to how to read and analyse financial statements shows how to build the clean three-year profit picture a buyer will ask for, and the salary vs dividends trade-off matters here too, because how you pay yourself shapes the profit a buyer sees.
Method 2: Seller’s Discretionary Earnings (SDE) for Micro Businesses
Below roughly £200,000 of profit, buyers usually switch to Seller’s Discretionary Earnings: net profit, plus the owner’s salary and benefits, plus add-backs. It answers the question a buyer of a small business really asks: “What will I take out of this each year if I run it myself?”
Take a small consultancy with £60,000 of net profit, an owner salary of £40,000 and £10,000 of add-backs. Its SDE is £110,000. At a typical 2.5× SDE multiple for a small service business, the enterprise value is £275,000. SDE multiples run lower than EBITDA multiples — typically 1× to 3× — because the buyer is buying a job as well as a profit stream. There is no published UK dataset for SDE multiples, so treat any SDE figure as a starting point, not a fact.
Method 3: Asset-Based Valuation — the Floor Price
Asset-based valuation values what the business owns, less what it owes, at market value: property, plant, vehicles, stock and cash, minus loans, overdrafts and creditors. It is the right method for property, plant or stock-heavy businesses, for loss-making companies, and for any business being wound down. It also sets a floor: a profitable company should be worth more than its net assets, which ignore customers, reputation and team.
Method 4: The Revenue Multiple
Revenue multiples are used where profits are thin or reinvested heavily — early-stage software, subscription businesses and high-growth companies. A tech business turning over £1,000,000 at a 3× multiple would be valued at £3,000,000. The quality and predictability of the revenue matter far more than its size: contracted recurring revenue with low churn commands a far higher multiple than one-off project income. A buyer will still want to know when the growth turns into profit.
UK Valuation Multiples in 2026: Size Matters Most
There is no official UK table of multiples. They move with interest rates, financing conditions, buyer demand, size and sector — and the strongest pattern in 2026 deal evidence is size: bigger businesses command higher multiples. Dealsuite’s UK and Ireland M&A Monitor for the first half of 2026, a survey of M&A advisers, found the average multiple rising from 3.6× at £200,000 of EBITDA to 4.9× at £1 million and 8.2× at £10 million, with a cross-sector average of 5.4×. The UK200Group’s SME Valuation Index put the median earnings multiple at 4.5× in November 2025. Sellers should note the warning in the same Dealsuite survey: in 49% of UK and Ireland sale processes in 2026, seller expectations were too high — by an average of 23%.
| Normalised EBITDA | Average multiple, H1 2026 | Indicative enterprise value |
|---|---|---|
| £200,000 | 3.6× | About £720,000 |
| £500,000 | About 4.2× | About £2,100,000 |
| £1,000,000 | 4.9× | About £4,900,000 |
| £10,000,000 | 8.2× | About £82,000,000 |
| Cross-sector average | 5.4× | — |
Sector matters too, though less than size. Indicative 2026 ranges, all on normalised earnings: accountancy 0.8×–1.2× gross recurring fees; hospitality 2.5×–6× maintainable profit; e-commerce 2.5×–5× net profit; construction 2.5×–4.5× adjusted earnings; manufacturing 3.3×–5× EBITDA; professional services 3.5×–5.5× EBITDA; software/SaaS 5×–8× EBITDA; IT managed services 6×–12×. These are indicative ranges, not guaranteed sale prices.
Worked Example: From EBITDA to Cash in Your Pocket
Take a fictional small manufacturing business with reported EBITDA of £180,000. Normalising it means adding back £25,000 of owner salary above the market rate, £10,000 of one-off legal costs and £5,000 of personal motoring run through the company. Normalised EBITDA is £220,000.
At a 4.0× multiple, the enterprise value is £880,000. The business has a £60,000 loan and £40,000 of cash, so net debt is £20,000 and the equity value is £860,000.
Now the tax. On a share sale, suppose the owner’s base cost is £100,000, giving a gain of £760,000. Deduct the £3,000 annual exempt amount for 2026/27, leaving £757,000. If Business Asset Disposal Relief applies, the gain is taxed at 18% — £136,260 — and the owner keeps about £723,740. Without the relief, the same gain would be taxed at the standard CGT rates of 18% or 24%. The headline valuation and the cash you keep can differ by six figures. See our guide to corporation tax rates for the other side of the picture: an asset sale is taxed inside the company first, at 19% on profits up to £50,000 and 25% above £250,000.
What Pushes Your Multiple Up — or Down
Two businesses with identical profits can sell at very different multiples. A multiple rises with recurring, contracted revenue; a spread customer base with no single client above 10–15% of turnover; a management team that can run the business without you; and clean three-year accounts. It falls with owner dependence, customer concentration, lumpy one-off income and weak record-keeping. The cheapest way to raise your valuation is often to fix that second list before you go to market — a year spent spreading the customer base and documenting processes can be worth more than a year spent growing profit by 10%.
Common Mistakes to Avoid
- Valuing on reported profit, not normalised profit — unadjusted figures invite the buyer to do the adjusting, always downwards.
- Using a multiple from the wrong size bracket or sector — the 8.2× average belongs to £10 million-EBITDA businesses, not to a £200,000 one.
- Forgetting net debt and working capital — the enterprise value is not what you receive.
- Ignoring the tax bill — share sale versus asset sale, and Business Asset Disposal Relief, can change the outcome by six figures.
Frequently Asked Questions
Can I value my business myself?
Yes, for a first estimate. Normalise your EBITDA, apply a multiple for your size and sector from current deal evidence, then deduct net debt. That gives you a defensible range to discuss with an adviser. Do not rely on a DIY figure for a sale or a tax filing — those need a professional valuation.
Final Thoughts
Valuing a small business is not about finding a magic formula. Normalise your profit honestly, choose the method that fits what a buyer is actually buying, apply a multiple grounded in current UK deal evidence for your size and sector, and follow the money through net debt and tax to the cash you would keep. Do that, and you will know your range — and when an offer is fair.
Related reading
Business Asset Disposal Relief